The Portobello Coade Stone Pillars
Three ornamental Coade stone pillars, (figure 1), form
the focal point of the community garden on the
Promenade at the foot of John Street, Portobello. The
pillars, which date from the early 19th Century, used to
stand in the garden of Argyle House, Hope Lane, off
Portobello High Street, (figure 2). A map of 1890 shows
the three pillars in the garden of the house, which was
then the manse of St James’s Church, but it is not known
how the pillars came to be in Portobello in the first place.
In 1989, the City of Edinburgh Council granted planning
permission for an extension to be built on to the front of
the 1820s house, which was to be converted into flats,
without making arrangements for the safekeeping of the
pillars which were listed structures.
Portobello Amenity Society members however turned up
in force on the day the bulldozers toppled the pillars and
succeeded in having the sections of the pillars rescued and
placed in council storage, with the council accepting
responsibility for and ownership of the pillars. Since then,
Portobello Amenity Society campaigned to have the
pillars re-erected on a suitable site in Portobello.
Research by Celia Butterworth, a member of the society,
proved that the pillars were Coade stone and that the
designs on the two smaller pillars were identical to the
Coade stone chimneys of Dalmeny House, built in 1817,
near South Queensferry, seat of Lord Rosebery, (figure 3).
There are three designs on the Dalmeny chimneys and on
the two smaller Portobello pillars - the fleur-de-lis, Tudor
rose and crown and lion. The rose refers to the Rosebery
name and it’s possible that the flower held by the lion
may be a primrose, (figure 4), Primrose being the family
name of the Earl of Rosebery. Records show that around
1820, £3,800 worth of Coade stone, which included
decorations in addition to the chimneys, was shipped to
Leith from the Coade factory in Lambeth so it is possible
that some of the chimney sections came to Portobello
then. The third larger Coade stone pillar which stood in
the garden of Argyle House has a hoop and fleur-de-lis
design, quite different from the “Dalmeny” designs. Its
construction is also different as it is made up of
complete circles whereas the circles of the two smaller
pillars are made up of quadrants. The larger pillar was
not designed as a chimney and its origin is unknown.
By 2005 the City of Edinburgh Council had agreed that
the pillars could be re-erected in a new community garden
to be built to replace a disused paddling pool on
Portobello Promenade and that they would maintain the
pillars. As the council was unable to fund the restoration
and re-erection of the pillars, Portobello Amenity Society
made an application to the Heritage Lottery Fund, which
was successful, and was granted £49,700 which was about
80% of the total cost. The council contributed by building
foundations for the pillars and providing the internal
metal supports for each pillar, while Portobello
Community Council and Portobello Amenity Society each
contributed £2,400.
Since the pillars’ removal from the garden of Argyle
House, the council had stored them in various locations,
often in jumbled piles outdoors. One location was next to
a recycling depot, (figure 5), which resulted in eight of the
quadrants decorated with the lion holding the primrose
being stolen. Several of the quadrants had been damaged
when the pillars had been toppled and the various moves
while in council storage had caused further damage.
As the pillars were to be re-erected as the centrepiece of a
garden which was open to the public, it was necessary
that each of the pillars should be supported by a designed
internal metal rod which had metal brackets across its
diameter, (figure 6). These held the rod tightly within the
inner surface of the Coade quadrants of the two smaller
pillars to provide the necessary rigidity. The same
principle was used with the larger pillar which consisted
of complete circles of a different design. The metal rod
was screwed into the foundation of each pillar and into a
metal cap at the top of the pillar thus ensuring the
structural stability of each pillar.
The pillars were expertly restored by Graciela Ainsworth
and her team of sculpture conservators who removed
several layers of paint of different colours from the
pillars, the top layer being battleship grey, (figure 2), and
repaired damaged sections. There were sufficient
quadrants with the fleur-de-lis design to construct one
pillar to match one of the Dalmeny chimneys. There was
only one original base and crown top however so it made
sense that one pillar should consist of original elements,
(figure 7). The conservators made replacement quadrants,
using a modern Coade mix, for the ones with the lion
design that had been stolen. There were several blank
quadrants in the pillars in the Argyle House garden which
were placed between complete circles of the lion and the
Tudor rose and crown designs to form the second smaller
pillar.
As only one pillar had a crown top, it was decided that the
other smaller pillar should have a matching new top. A
local potter and amenity society member, Alison
Robinson, after considerable trial and error, managed to
recreate Mrs. Coade’s original Coade stone mix. She then
made a new capital for the other smaller pillar. The
sections of the capital were joined together with butterfly
fixings which Alison also made, (figure 8), together with
two quadrants with the Tudor rose and crown design to
complete a circle.
At the start of the project, it was planned to erect railings
round the pillars as a form of protection. However, it was
finally decided that railings might prove problematic and
might actually encourage youngsters to climb over them
to access the pillars. The planting of prickly plants, such
as berberis, round and between the pillars was decided on
instead. When this was decided, the three pillars had been
erected, the two smaller ones with tops, the larger one as
it had been in its original location, without a top. The
general feeling of those on the committee organising the
project was that it looked rather odd having one pillar
without a top.
Alison bravely decided to make a new top for the
remaining pillar in her own Coade stone mix as the
money which had been set aside for the railings could now
be used for this purpose. While the making of a smaller
capital had not been without its problems, the huge size
and scale of the larger top presented Alison with
enormous difficulties. Viewed from the ground, the top
she created looks far smaller than it actually is. It consists
of 24 sections, each section being of a very complex shape.
In actuality the finished top measures five feet in width
and two feet in depth. Twelve of the largest sections,
which Alison had made in her workshop, could not fit into
her own kiln and had to be fired at Ibstock Scottish Brick
in Glasgow, where half of the pieces exploded after
leaving the kiln, possibly due to residual moisture, and
had to be made again. Alison overcame all of these
difficulties and the larger pillar now with its new top
looks splendid.
For our application to the Heritage Lottery Fund to be
successful, the society had to prove that there was a huge
amount of support from the community for the project.
This we did in several ways. Meetings were held to inform
the public about the intended project. A window display
was set up in Portobello library which included several of
the pillar quadrants, explaining how they would be
cleaned. Alison organised several very well attended events
for local children in the community centre and the local
primary school at which model pillars were built out of
carpet tubes with prizes being given for the best decorated
pillars, (figure 9). She also held several tile making
sessions at which children press moulded tiles in modern
Coade with either their name or handprint. The tiles were
later taken away to be fired and then returned to the
children. A public talk was also held, on ‘Edinburgh
Monuments’ which included the pillars. Once the pillars
had been erected, another public talk was held at which
Celia talked about the history of the pillars, Alison about
making the smaller new capital, while Graciella explained
how the pillars were cleaned, restored and erected.
Today the pillars are much loved by local residents and
much admired by visitors. The project not only preserved
part of Portobello’s history but provides an attractive
focus to the community garden on the promenade. It is
also a testament to the determination and talent of local
people who wanted to preserve part of Portobello’s past
and to the skill of the conservators who repaired and re-
erected the pillars.
John Stewart, Chair, Portobello Amenity Society,
Director, Portobello Heritage Trust
Reproduced with thanks to ‘Glazed expressions’,
the magazine of TACS, the Tiles and Architectural Ceramics Society.
Figure 1
The restored Coade stone columns in the community garden
(photo by Celia Butterworth courtesy of John Butterworth)
Figure 2
One of the smaller pillars in the garden of Argyle House
(photo by Iain Abbot courtesy of Rosemary Mander)
Figure 3
Some of the chimneys at Dalmeny House
(photo by Celia Butterworth courtesy of John Butterworth)
Figure 4
Lion quadrants after cleaning
(photo courtesy of Graciela Ainsworth)
Figure 5
The pillar sections in council storage at the recycling centre
(photo by Celia Butterworth courtesy of John Butterworth)
Figure 6
The structural supports inside one of the smaller pillars
(photo courtesy of Graciela Ainsworth)
Figure 7
The pillars under construction
(photo courtesy of Graciela Ainsworth)
Figure 8
Coade stone butterfly fixings for the new capitals
(photo courtesy of Graciela Ainsworth)
Figure 9
Some of the children’s model pillars
(photo by Celia Butterworth courtesy of John Butterworth)